Consistency and uniformity are critical characteristics of the drying or cooling process for many products and materials, and are hallmarks of Ventilex Fluid Bed Dryer and Cooler technologies. Ventilex works closely with you to design fluidized bed systems that are engineered to efficiently and dependably produce the required process output. This collaboration begins with product or material testing by Ventilex.
In our lab, we can simulate processes with varying parameters to determine the optimal specifications for your product processing. We take testing and pilot studies seriously. Every product is different. We know that size of the product as well as changes in density during processing and drying have a big effect on the optimization of the process.
We evaluate your samples for various characteristics and optimize energy use along with minimization of equipment, capital expenditure and waste. Samples can be subjected to tests at temperatures up to 1112°F. After careful analysis of the results, each installation is custom designed and manufactured for your process.
Testing at the Ventilex Pilot Plant
Ventilex offers testing programs for your product with our equipment. Testing at the Ventilex Pilot Plant can be an economical method of determining if Fluid Bed Drying or Fluid Bed Cooling is the proper method for drying or cooling your product in the development of your process.
Testing at Your Facility
Ventilex offers a comprehensive evaluation of Drying and/or Cooling at your pilot plant, production plant, or test facility. Our equipment can be powered by natural gas, propane, or steam. We supply all the fans and duct work, along with the controls. You just need to add electrical power along with gas or steam. Throughput rates are based on product type. However, nominal throughput is normally in the 550 to 1100 lb per hour range.
Pilot Plant Rental Unit
Ventilex offers the option of rental units for clients to use to develop their process and to provide initial production for startups. Rental is on a monthly basis plus all freight charges to and from your site. Additionally, Ventilex can supply a qualified test engineer at a fixed daily cost. Contact our office to discuss the costs and availability.
